Although water damage does cause mold to grow, you can do your part to prevent it by hiring a water damage restoration service. These experts have the right tools and equipment to prevent the fungus. Additionally, mold thrives in warm, humid environments, so you should install an air conditioner or HVAC system that has dehumidification. Your humidity level should never exceed 50%. If you’re still worried, here are some helpful tips:
Houseplants
The process of drying out a flood area increases the chances of a house or apartment developing mold. Not only is this unsanitary, but it spreads the mold spores throughout the home. Heaters and AC systems are notorious for spreading mold spores. Avoid attempting to dry out flooded areas yourself – you can simply Google the methods for cleaning up a flood area. This won’t help prevent the mold from spreading throughout your home or apartment, though.
First, if you have flooded your home, you need to dispose of any perishable household items. Wet carpeting, mattresses, and furniture can sustain a colony of mold. Wet drywall and insulation can also harbor mold spores. Make sure that you replace any carpeting or furniture that has become contaminated by water. Moreover, you need to dispose of any appliance that has a fan if it was exposed to the water-damaged area.
Low humidity levels
When it comes to mold, there are many reasons to be concerned at Water Damage Restoration Tulsa OK. While water is a calming element, too much of it can lead to an unhealthy environment that supports mold growth. High humidity levels, for example, can be a breeding ground for mold and mildew, which is very difficult to eradicate. Additionally, a buildup of water in a building can lead to an unstable ecosystem, fostering the growth of mold.
The ideal humidity level in a home is 30% to 50%. You can achieve this by using a dehumidifier and/or an air conditioner. You can also use fans or open windows to reduce the level of humidity in your home. In addition, make sure your house has plenty of ventilation and fix leaks. Once mold and mildew is identified, the next step is to clean the affected areas.
Bleach solution
In addition to preventing mold, a chlorine bleach solution can help prevent the growth of new ones. It should be used on clean surfaces to disinfect them. A 10% solution of chlorine bleach should be applied to the affected area for 10 minutes. Rinse with clean water and allow to dry. Monitor the item for a few days. Once it shows signs of mold growth, it should be discarded or stored in a well-ventilated area.
While chlorine bleach may be a good choice for many homeowners, it is not recommended for professional use. The Environmental Protection Agency (EPA) and Occupational Safety and Health Administration (OSHA) no longer recommend chlorine bleach for mold remediation. This is because most bleach solutions are composed of 90 percent water and evaporation of bleach leaves a large quantity of water behind. This excess water enables mold to flourish by feeding the spores in the surface. The surface may look clean but is actually filled with deeper and stronger spores.
All American Restoration
The process of Water Damage Restoration Tulsa involves more than simply vacuuming water and drying the affected area. The presence of a water-damaged home or business poses a significant health risk because it can harbor dangerous pathogens, such as mold and bacteria. This water can also cause a variety of respiratory problems and infections. The process of water mitigation and restoration is a complicated one and may require the help of professionals to ensure a safe, sanitary environment.
After a flood, the best way to prevent the development of mold is to remove as much water as possible. This includes removing all standing water and debris. Dehumidifiers and air movers can be used to eliminate moisture and kill bacteria. Once the water has been removed, the area must be thoroughly dried. After removing the water, contaminated materials should be discarded. Moreover, a wet/dry vacuum is essential for getting rid of water. Fans should be avoided as they can spread mold.
Conclusion
If you’ve recently experienced water damage in your home, you need to call a professional water damage restoration company to get the job done right. Water damage restoration services can take care of a variety of tasks, including disinfecting affected items, cleaning affected areas, and replacing sheetrock and carpet. They can also clean contaminated areas and apply protective products to help prevent mold growth. Fortunately, water damage insurance companies often cover these costs, saving homeowners from having to pay for the cost of a restoration company.